[SKXMOD] Ana-Digi Tuna Modding Kits | Stainless Steel Version

Module and along parts presented in the pictures are NOT INCLUDED

CLICK TO SEE PURCHASHING REMINDERS

CLICK TO SEE DIGITAL MANUAL

          DEMONSTRATION

          COMPATIBILITY

• Casio GA-2100/GA-2110 Series
• Casio GMA-S2100 Series
• Casio GA-B2100 Series
• Casio GM-2100 Series
• Casio GBM-2100 Series

GMA-S Variant, if using all original Casio parts. Meaning chapter ring, hour marker, hands and dial. It will have a rim of crevice around the chapter ring. While comparing with other series after completing the build. It is not as full. But does not impact functionality. Only aesthetically.  

GA and GMA-S original chapter rings also has an visible cut-out on 1 and 7 o'clock position. As an inevitable flaw from Casio's design, we suggest customers getting our version of upgraded ones. If you have strong concern of such.

Because Casio 2100 models are made differently and in many different series.

We provide different cases for them. And THEY ARE NOT COMPATIBLE WITH EACH OTHER.

The only multi-compatible casing is for both GM-2100 and GBM-2100 series.

Meaning this particular casing can house both GM and GBM models' modules.

Other three casing, for GA-2100/GMA-S2100/GA-B2100, are 1 to 1 compatible only.

Lastly, none of our modding kits are compatible to GM-B2100 series.

Therefore, PLEASE CHECK MODEL FIRST BEFORE PURCHASE!!!

          SPECS:

• FKM Rubber Source Supplier: Daikin Chemicals Japan
• Case Material: 316L Stainless Steel (Buttons Pre-installed on cases)
  
• Shroud Material: 316L Stainless Steel
  
• Shroud Screws Material: 316L Stainless Steel
• Bezel Material: 316L Stainless Steel
• Bezel Insert Material: Ceramic or 316L Stainless Steel
• Buckle Material: 316L Stainless Steel
• Retainer Material: 316L Stainless Steel
• Coating: Metal Hardware Fully IP Coated, Rated over 980HV on Vickers Hardness Test
• Glass: Sapphire (AR coated on underside)
• Wrist Circumference (Rubber): 16cm to 22cm
• Bands Length: 137mm+74mm
• Case Diameter: 45.6mm (Without Shroud)
• Case Diameter: 51.8mm (With Shroud)
• Lug to Lug: 44.4mm (Without Shroud)
• Top to Bottom 53.2mm (With Shroud)
• Thickness: 16.4mm
• Lug Width: 22mm
• Water Resistant: 500M Machine Tested
• ROV Captured Data, Antarctica Deepsea
• Peak Record: 1510M
• DATA 1, DATA 2

• Weight: 150g
• (Case Assembly without Module Installed)
• Weight: 157g
• (Case Assembly with Module Installed)
• Weight: 217g
• (Case & Module and Rubber Band, Retainer, Buckle)
• Weight: 61g
• (Rubber Band, Retainer, Buckle)

Depends on components you chose, parts containing will vary.

Our case does not always fit all model from above mentioned series.

Because on certain limited/special/collaboration edition model, Casio might do small modification.

Therefore, the general dimension of the inner carbon core is changed. Parts cannot fit into our case anymore.

GAE-2100 series and GM-2100MF-5A is sure won't fit. Please buy with cautions if you have such model.

Because the internal structure for different series are made differently.

We provided different option to choose from. And THEY ARE NOT COMPATIBLE WITH EACH OTHER.

Therefore, CHECK YOUR WATCH MODEL FIRST BEFORE PURCHASING!!!

FKM stands for Fluoroelastomer, which is a class of man-made rubber of great density but soft in touch. Our DAI-EL FKM rubber bands and many accompany accessory are specifically made by Daikin.

Able to offer exceptional resistance to wide range of industrial chemicals. Such as acids, oils, and fuels. With their strong carbon-fluorine bonds and low gas permeability, these materials are able to withstand harsh environments and maintain their integrity in low to high temperature conditions. Range from -45 °C to +204 °C.

Most importantly, resistance to oil and sweat in consumer grade product such as this. Soft, flexible, non-reactive materials which will not degrade in long term usage.

Attentions:

Although modding kit we have got similar dimensions.

Yet the internal structures are entirely different to fit different model.

Hence, please check for your model thoroughly before purchasing.

This listing only contains two main items: case assembly and rubber band(optional).

That you can choose combinations upon those components freely.

For extra rubber band(s), please purchase them through the menu. 

Unless stated otherwise, rubber band hardware follows the render demostration under that colorway.

The harden surface only prevents daily minor bumps and scratches from forming.

Does not mean it can withstand impact, puncture, slashes or substantial force in similar form.

The beeping volume will be weaken severely for the full metal enclosure.

Please purchase with discretion if you have concern of regards.

(There might be slight color difference among different accessory and case under same colorway.)

(Due to many variating factor: manufacturing method, material, design and more.)

(Also factor in that we make our own spray painting. Please take into consideration.)

(The term of "Gold" and "Silver" merely represents the colorway.)

(Not meaning coated or made out of true precious metal.)

This product is not manufactured by Apple, Seiko, Casio or related brands.

It is made by SKXMOD.

A third-party product to accessorize aforementioned brands and more.